1. After sawing, the pipe ends are smooth and clear without any burr, the equipment has high working efficiency and low noise.
2. The electric control part adopts the motion control system; it can optimize the cutting according to the shape of the pipe;
3. the software has advanced performance and returns to the S curve. No mechanical impact, improve the life of the whole transmission system. The operation is simple and the failure rate is very low.
4. The operating system is equipped with a touch screen, which is easy to operate. It can set the shape and size of the product, set the cutting parameters, monitor the servo position status and alarm status.
5. Encoder pulse optical fiber transmission. Strong anti-interference ability.
Cut the running steel pipe to a certain length.
When the continuously working rolling mill sends the formed steel pipe to the flying saw, the sawing car is tracked to synchronize with the pipe speed, the clamping block is clamped, and the two sawing systems mounted on the rotary turntable are rotated by the saw blade, and the AC servo motor Driven by radial feed. At this time, the turntable is also rotating. The sawing system performs a composite movement between the turntable and its own feed, and cuts the steel pipe along the cross-sectional shape of the part being cut. Each system then relaxes back to its original position and waits for the next working cycle.It is characterized by good cut quality, no burrs, high work efficiency and low noise. The operating system is equipped with a touch screen for easy and convenient operation. The shape and size of the product can be arbitrarily set, cutting parameters can be set, and the operating status and alarm status can be monitored.
Bed system, saw car, drive system, turntable rotation system, double saw blade cutting, feed system, clamp, roller device, speed measuring device, hydraulic system, control system (operating table, control cabinet, photoelectric pulse encoder) and so on.
-
508 Mill saw
-
127 Mill Saw
