Steel pipes are applied in many fields now, WRD Providing Variety of customized pipe mill solutions, All of them Can be customized according to site space factors, raw materials, energy situation, product quality and capacity control requirements.
1.API PIPE MILL FOR PIPES UP TO 28”
Wide Range of Production：Can produce pipes from 1/2” to 28” with high-grade material such as X80 and N80.
Advanced Technology：Adopt mature roll combination technology and side outlet roll changing technology, which can greatly improve production efficiency and reduce the cost of production and 50% of rolls.
Optimized Forming Process：Two forming ways supplied: FF and FFX ；Make full use of the free adjustable roll function to obtain the product quality that other mills cannot get．
High-automatic：From uncoiler to run-out table, all equipment are high automated controlled. The operation is convenience, safety and reliability.
One-stop Solution：WRD can also supplies various pipe finishing equipment such as End Facing, Threading, Hydro testing, Eddy Testing, Annealing, Auto painting, Auto Stacking, etc.
Outstanding Achievements：More than 15 complete API pipe mills design, manufacture, install and commission by WRD
2.DIRECT-FORMING SQUARE AND RECTANGULAR PIPE MILL
Advanced Technology：It adopts the multipoint bending combined type forming technology, which consists of forming and sizing section, one set forming roll in the forming section, while manufacturing, the roll could be adjusted partly.
High production efficiency：One set of mould can produce all size of square and rectangle pipe, so the time of adjusting the mould is shorter and the production speed is increased.
Lower Cost：Cut down the cost of machine; Save more than 40% of rolls; Reduce the load of power utilization.
Fast Payback：Easy to operate and maintain. You can expect a typical return on investment minimum within 12-18 months.
Easy Operation：The software and operator panel with easy user interface. Ability to change the production diameter by modifying the settings from computer without changing die.
3.SPIRAL PIPE MILL FOR PIPES FROM 219MM- 3020MM
Advanced Technology：The forming adopts three-roll operated forming, both outer and inner welding adopts double wires automatic welding, plasma pipe cutting.
Compatibility：The production specifications can be enlarged without changing the whole line.
Simple Operation：The electrical control system adopts Siemens PLC，VVVF system and digital display system for easier operation.
4.WELDED H BEAM MILL
Wide Range of Production：It can produce various kinds of welded H-beam from 50*100 to 800*400mm.
Flexible Production：It can produce small batch and multi-various products to meet the market demand.
High production efficiency：The steel structure is assembled, welded and corrected at the same time, and the production time is greatly reduced.
Lower Cost：High degree of automation, the production process is safer. So fewer operators are needed.
5.SLITTING AND CUT-TO-LENGTH LINE
Wide Range of Production：Suitable for small wall thickness and more number of slitting strip, as well as high steel grade with large thickness slitting strip up to 25mm thick.
Flexibility：Slitter and cut-to-length could be separately designed and operated and also could be designed and operated as a combined one with both of slitting and cutting into lengths functions.
Advanced Technology：The forming adopts three-roll operated forming, both outer and inner welding adopts double wires automatic welding, plasma pipe cutting.
Precision slitting：The width tolerance of finished strip can be controlled within ±0.05mm.
Practicality：It’s convenience to change the blade; Easy maintenance and lower operating cost.
6.HOT - DIPPED GALVANIZING LINE
Outstanding Achievements：More than 40 complete lines designed, manufactured, installed and commissioned by WRD in and out of China.
Low Consumption：The amount of natural gas used per ton for galvanizing pipes is less than 13 cubic meters, which is outperformed most of the peers.
Precision Control of Zinc Coating：Zinc layer can be controlled to reach desired level, or within the scope of customer requirements, fully meet the international standards.
Fast Payback：High productivity. Easy to operate and maintain. You can expect a typical return on investment minimum within 18-24 months.
High-automatic：The combination of auto and semi-auto systems not only makes the mill line create productivity efficiently, but also avoid the serious consequences caused by electrical system break down.
Environmental Friendly：Equips with acid mist absorption device, zinc dust collect device, solvent iron removal device, sewage & waste acid treatment system, no pollution emission.
Welcome to contact us by call or email
Phone: +86-13752728312 (WhatsApp )
E-mail: info@wrdtubemill.com
